Centos 6 Docker配置桥接网络-白红宇

Centos 6 Docker配置桥接网络

阅读量：2388 次

发布时间：2019-05-10

本文共 8357 字，大约阅读时间需要 27 分钟。

为了使本地网络中的机器和容器更方便的通信，我们经常会有将容器配置到和主机同一网段的需求。这个需求其实很容易实现，我们只要将Docker容器和宿主机的网卡桥接起来，再给Docker容器配上IP就可以了。

Centos 6按照下面的方法操作（6与7的操作有所不同）

[root@localhost ~]# cd /etc/sysconfig/network-scripts/[root@localhost network-scripts]# lsifcfg-eth0   ifdown-ib    ifdown-ppp     ifup-aliases  ifup-ipv6   ifup-ppp       init.ipv6-globalifcfg-lo     ifdown-ippp  ifdown-routes  ifup-bnep     ifup-isdn   ifup-routes    net.hotplugifdown       ifdown-ipv6  ifdown-sit     ifup-eth      ifup-plip   ifup-sit       network-functionsifdown-bnep  ifdown-isdn  ifdown-tunnel  ifup-ib       ifup-plusb  ifup-tunnel    network-functions-ipv6ifdown-eth   ifdown-post  ifup           ifup-ippp     ifup-post   ifup-wireless[root@localhost network-scripts]# cp ifcfg-eth0 ifcfg-br0 
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9

[root@localhost network-scripts]# vi ifcfg-eth0DEVICE=eth0HWADDR=00:0C:29:DB:B2:28TYPE=EthernetUUID=b2268aab-fa2e-49e9-bd67-2572f29e5790ONBOOT=yesNM_CONTROLLED=yesBOOTPROTO=staticIPADDR=192.168.1.179NETMASK=255.255.255.0GATEWAY=192.168.1.1DNS1=114.114.114.114DNS2=8.8.4.4 
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10 
  11 
  12 
  13 
  14 
  
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10 
  11 
  12 
  13 
  14

增加BRIDGE=br0，删除IPADDR、NETMASK、GATEWAY、DNS

DEVICE=eth0HWADDR=00:0C:29:DB:B2:28TYPE=EthernetUUID=b2268aab-fa2e-49e9-bd67-2572f29e5790ONBOOT=yesBRIDGE=br0BOOTPROTO=none#IPADDR=192.168.1.179#NETMASK=255.255.255.0#GATEWAY=192.168.1.1#DNS1=114.114.114.114#DNS2=8.8.4.4 
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10 
  11 
  12 
  13 
  
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10 
  11 
  12 
  13

保存退出

[root@localhost network-scripts]# vi ifcfg-br0DEVICE=eth0HWADDR=00:0C:29:DB:B2:28TYPE=EthernetUUID=b2268aab-fa2e-49e9-bd67-2572f29e5790ONBOOT=yesNM_CONTROLLED=yesBOOTPROTO=staticIPADDR=192.168.1.179NETMASK=255.255.255.0GATEWAY=192.168.1.1DNS1=114.114.114.114DNS2=8.8.4.4 
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10 
  11 
  12 
  13 
  14 
  
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10 
  11 
  12 
  13 
  14

修改DEVICE为br0，Type为Bridge，把eth0的网络设置设置到这里来

DEVICE=br0TYPE=BridgeONBOOT=yesBOOTPROTO=staticIPADDR=192.168.1.179NETMASK=255.255.255.0GATEWAY=192.168.1.1DNS1=114.114.114.114DNS2=8.8.4.4 
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10 
  
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10

保存退出

[root@localhost network-scripts]# service network restart 
 
  1 
  
 
  1

这一步我出现了问题，不过重启宿主机后就OK了。

[root@localhost ~]# ifconfigbr0       Link encap:Ethernet  HWaddr 00:0C:29:DB:B2:28          inet addr:192.168.1.179  Bcast:192.168.1.255  Mask:255.255.255.0          inet6 addr: fe80::20c:29ff:fedb:b228/64 Scope:Link          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          RX packets:137 errors:0 dropped:0 overruns:0 frame:0          TX packets:93 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:0          RX bytes:13745 (13.4 KiB)  TX bytes:11095 (10.8 KiB)docker0   Link encap:Ethernet  HWaddr C6:01:70:AF:C6:E4          inet addr:172.17.42.1  Bcast:0.0.0.0  Mask:255.255.0.0          inet6 addr: fe80::c401:70ff:feaf:c6e4/64 Scope:Link          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          RX packets:0 errors:0 dropped:0 overruns:0 frame:0          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:0          RX bytes:0 (0.0 b)  TX bytes:468 (468.0 b)eth0      Link encap:Ethernet  HWaddr 00:0C:29:DB:B2:28          inet6 addr: fe80::20c:29ff:fedb:b228/64 Scope:Link          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          RX packets:137 errors:0 dropped:0 overruns:0 frame:0          TX packets:101 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:1000          RX bytes:15663 (15.2 KiB)  TX bytes:11959 (11.6 KiB)lo        Link encap:Local Loopback          inet addr:127.0.0.1  Mask:255.0.0.0          inet6 addr: ::1/128 Scope:Host          UP LOOPBACK RUNNING  MTU:65536  Metric:1          RX packets:16 errors:0 dropped:0 overruns:0 frame:0          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:0          RX bytes:960 (960.0 b)  TX bytes:960 (960.0 b) 
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10 
  11 
  12 
  13 
  14 
  15 
  16 
  17 
  18 
  19 
  20 
  21 
  22 
  23 
  24 
  25 
  26 
  27 
  28 
  29 
  30 
  31 
  32 
  33 
  34 
  35 
  36 
  
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10 
  11 
  12 
  13 
  14 
  15 
  16 
  17 
  18 
  19 
  20 
  21 
  22 
  23 
  24 
  25 
  26 
  27 
  28 
  29 
  30 
  31 
  32 
  33 
  34 
  35 
  36

[root@localhost ~]# git-bash: git: command not found[root@localhost ~]# yum install -y git[root@localhost ~]# cd /etc/sysconfig/network-scripts/[root@localhost network-scripts]# git clone https://github.com/jpetazzo/pipework 
 
  1 
  2 
  3 
  4 
  5 
  6 
  
 
  1 
  2 
  3 
  4 
  5 
  6

pipework是由Docker的工程师Jérôme Petazzoni开发的一个Docker网络配置工具

[root@localhost network-scripts]# lsifcfg-br0    ifdown-eth   ifdown-post    ifup          ifup-ippp   ifup-post    ifup-wireless           pipeworkifcfg-eth0   ifdown-ib    ifdown-ppp     ifup-aliases  ifup-ipv6   ifup-ppp     init.ipv6-globalifcfg-lo     ifdown-ippp  ifdown-routes  ifup-bnep     ifup-isdn   ifup-routes  net.hotplugifdown       ifdown-ipv6  ifdown-sit     ifup-eth      ifup-plip   ifup-sit     network-functionsifdown-bnep  ifdown-isdn  ifdown-tunnel  ifup-ib       ifup-plusb  ifup-tunnel  network-functions-ipv6[root@localhost network-scripts]# cp pipework/pipework /usr/local/bin/[root@localhost network-scripts]# cd[root@localhost ~]# docker run -itd --net=none --name docker_bridge  centos_with_httpd:genesis bash5417847d3edf9381acf4bcc94c5345002521f4500415d835f081b022f6d48723[root@localhost ~]# docker psCONTAINER ID        IMAGE                       COMMAND             CREATED             STATUS              PORTS               NAMES5417847d3edf        centos_with_httpd:genesis   "bash"              8 seconds ago       Up 6 seconds                            docker_bridge[root@localhost ~]# docker exec -it docker_bridge bash[root@5417847d3edf /]# ifconfiglo: flags=73
   
      mtu 65536        inet 127.0.0.1  netmask 255.0.0.0        inet6 ::1  prefixlen 128  scopeid 0x10
    
             loop  txqueuelen 0  (Local Loopback)        RX packets 0  bytes 0 (0.0 B)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 0  bytes 0 (0.0 B)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0[root@5417847d3edf /]# exit 
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10 
  11 
  12 
  13 
  14 
  15 
  16 
  17 
  18 
  19 
  20 
  21 
  22 
  23 
  24 
  25 
  26 
  
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10 
  11 
  12 
  13 
  14 
  15 
  16 
  17 
  18 
  19 
  20 
  21 
  22 
  23 
  24 
  25 
  26

[root@localhost ~]# rpm -Uvh https://repos.fedorapeople.org/openstack/EOL/openstack-grizzly/epel-6/iproute-2.6.32-130.el6ost.netns.2.x86_64.rpm 
 
  1 
  
 
  1

不升级会报错Object “netns” is unknown, try “ip help”

[root@localhost ~]# pipework br0 docker_bridge 192.168.1.187/24[root@localhost ~]# docker exec -it docker_bridge bash[root@5417847d3edf /]# ifconfigeth1: flags=4163
   
      mtu 1500        inet 192.168.1.187  netmask 255.255.255.0  broadcast 192.168.1.255        inet6 fe80::bcf2:9cff:fe1e:4796  prefixlen 64  scopeid 0x20
            ether be:f2:9c:1e:47:96  txqueuelen 1000  (Ethernet)        RX packets 7  bytes 528 (528.0 B)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 7  bytes 510 (510.0 B)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0lo: flags=73
    
       mtu 65536        inet 127.0.0.1  netmask 255.0.0.0        inet6 ::1  prefixlen 128  scopeid 0x10
     
              loop  txqueuelen 0  (Local Loopback)        RX packets 0  bytes 0 (0.0 B)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 0  bytes 0 (0.0 B)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0 
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10 
  11 
  12 
  13 
  14 
  15 
  16 
  17 
  18 
  19 
  20 
  21 
  
 
  1 
  2 
  3 
  4 
  5 
  6 
  7 
  8 
  9 
  10 
  11 
  12 
  13 
  14 
  15 
  16 
  17 
  18 
  19 
  20 
  21

ping一下网关

[root@5417847d3edf /]# ping 192.168.1.1PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=63.1 ms64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=2.12 ms^C--- 192.168.1.1 ping statistics ---2 packets transmitted, 2 received, 0% packet loss, time 1001msrtt min/avg/max/mdev = 2.125/32.637/63.150/30.513 ms

转自：

转载地址：http://yupab.baihongyu.com/

你可能感兴趣的文章